AFCO / Santhuff’s / Menscer(Mono-Twin Tube) Strut (5 on 4.75 Hub Mount) 001-0199
AFCO / Santhuff’s / Menscer(Mono-Twin Tube) Strut (5 on 4.75 Hub Mount) 001-0199
20.25 lb Combined brake weight including all components: 2 hubs, supplied steel studs, bearings, seals, 4 pads, 2 calipers, 2 brackets, 2 rotors with bolts, hardware.
Kit Weight: 20lbs
Instructions: Click Here
Kit includes:
- F1 2 piston calipers 002-0054SSP-1 / 002-0054SSP-2
- #1 Standard F1 Pads 6-1019
- 10.75x .310 steel revolution rotors 3-10753105525D
- Steel caliper mounting brackets 16-0219-1 / 16-0219-2
- Aluminum 5 on 4.75 hubs 8-103
- Timken bearing, races and seals
- 1/2 -20” wheel studs
- All necessary mounting hardware
Wheel Speed Sensor Kit
TBM 2 Piston (F1/DR-1) Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes/proportioning. They must be used with a properly installed aftermarket-style 4 piston rear brake kit.
Kit fits the following:
- AFCO / Menscer Struts
- Santhuff’s 8 & 15 degree struts
⚠ WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
We recommend using TBM DOT 5.1 Extreme 6 Brake Fluid for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
AFCO / Santhuff’s / Menscer(Mono-Twin Tube) Strut (5 on 4.75 Hub Mount) 001-0199
20.25 lb Combined brake weight including all components: 2 hubs, supplied steel studs, bearings, seals, 4 pads, 2 calipers, 2 brackets, 2 rotors with bolts, hardware.
Kit Weight: 20lbs
Instructions: Click Here
Kit includes:
- F1 2 piston calipers 002-0054SSP-1 / 002-0054SSP-2
- #1 Standard F1 Pads 6-1019
- 10.75x .310 steel revolution rotors 3-10753105525D
- Steel caliper mounting brackets 16-0219-1 / 16-0219-2
- Aluminum 5 on 4.75 hubs 8-103
- Timken bearing, races and seals
- 1/2 -20” wheel studs
- All necessary mounting hardware
Wheel Speed Sensor Kit
TBM 2 Piston (F1/DR-1) Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes/proportioning. They must be used with a properly installed aftermarket-style 4 piston rear brake kit.
Kit fits the following:
- AFCO / Menscer Struts
- Santhuff’s 8 & 15 degree struts
⚠ WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
We recommend using TBM DOT 5.1 Extreme 6 Brake Fluid for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty.
